2024 Frontier Heavy Offset Disks DH5316

Information

2024 Frontier Heavy Offset Disks DH5316

Features may include:

Adjustable disk blade scrapers increase productivity

Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.

Clevis hitch is durable for those tough working conditions

The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.

Disk blade sizes and weight per blade provide superior ground penetration

Disk blades on the DH53 Series Offset Disks are available in 71.1-cm, 76.2-cm, or 81.3-cm (28-in., 30-in, or 32-in.) diameter. The weight per blade on these disks ranges from 152.9 kg to 241.8 kg (337 lb to 533 lb) for superior penetration in tough soil conditions.

Only notched disk blades for front and rear are available on the DH53 Series model

End washers and wrenches keep gang shaft end nut tight

End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.

Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.

Oil bath tapered roller bearings minimize maintenance

Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.

Rear hitch for attaching an additional implement

A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag.

Transport locks secure disk wings

Transport locks are standard, ensuring disk wings are in secure transport mode.

Two separate control arms create consistent performance

Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.

Photos

Highlights

  • Ashmore, Illinois
  • 2024
  • Frontier
  • Heavy Offset Disks DH5316
  • Available

Specifications

  • 2024
  • Frontier
  • Heavy Offset Disks
  • DH5316
  • Disc
  • Drawbar: 89.5-111.9 kW (120-150 hp)
  • 105-132 kW (141-176 hp)
  • Type: Implement - Quantity of 4 | 12.5L x 15 10 ply in.
  • Spade
  • Single Offset Rigid
  • Markings: SMV | Safety tow chain
  • Lights
  • Maximum penetration: 22.9 cm (9 in.) | Disk blades Spacing: 30.5 cm (12 in.) | Blade sizes: 711x9.5 mm (28x0.375 in.) / 762x9.5 mm (30x0.375 in.) / 813x9.5 mm (32x0.375 in.) | Tube size: 15.2x15.2x0.95 cm (6 x 6 x 3/8 in.) | Axle size: 6.4 cm (2.5 in.)
  • 3.4 m (11 ft)
  • With base blades: 22.9 cm (9 in.)
  • Approximate: 3 m (10 ft)
  • 2 Positions
  • 2 Positions
  • Net: 3866.9 kg (8525 lb) | Per disk blade: 203.7 kg (449 lb)
  • Wheel hub bearings: Dual Tapered Roller Bearings | Disk blades Quantity: 21 | Disk blades type: Notched (front) / Notched (rear) /Standard | Blade concavity: Standard high | Bearing type: Oil Bath Tapered Roller | Bearing wear plates: Standard | Bearing standards: Welded, Reinforced | Scrapers: Adjustable
  • Heavy
  • Axle: Round Heat Treated Alloy Steel Threaded on Both Ends
  • Wheel: 8 Bolt
  • 1 year